Includes one High Beam and one Low Beam 7-inch glass sealed beam bulb with a halo ring feature. The sealed beam bulbs plug into the stock headlight socket as a replacement, while the halo ring requires a separate 12-volt power connection.
- Wiring options: daytime running light, tied to parking lights, or on with headlights.
- Wire color guidance: red commonly for power and black commonly for ground, though color coding may vary by brand.
The Halo Headlight Kit includes: 1 High Beam & 1 Low Beam Glass Sealed Beam Bulbs (7 inch)
The sealed beam bulbs simply plug into your stock headlight socket like a factory application replacement, however the Halo feature around the outer ring of the bulb will require wiring into
your vehicle’s power supply.
You may choose from 3 different ways of hookup.
Option #1 As a daytime running light- Simply wired to a 12 volt power source when ignition is on.
Option #2 Halo Ring only is on when parking lights are on- wired into the vehicle’s factory parking light wires. This is the most recommended place to connect your halo headlights.
Note: DO NOT wire the halo headlights to the turn signal lights because it will cause the halo ring to blink with the turn signals.
Option #3 Halos on while headlights are on- This is done by hooking the halo wires directly to the headlight wiring. When using this wiring option, you will notice that the halo ring will not be as visible due to the amount of light reflecting inside the sealed beam.
In most applications, you will find red and black wires.Determining which wire is for the power and for the ground can be confusing, due to the fact color-coding is not always consistent across brands. A good rule of thumb is, if you see red wires, it is generally to the power, if you see black wire, it is generally to the ground. For example, if you see red and white wires, the red is to the power and the white to the ground, if you see white and black wires, the whites is to the power, and the black is to the ground. To test, you can always try to connect the wires to the power source and a ground to determine which wire is for the power and the ground.