UMI Stage 2 Handling Package is a complete suspension kit for GM A-Body vehicles. The package contains matched front and rear components including upper and lower front A-arms, sway bars and end links, shocks for all four corners, lowering springs, rear tubular control arms, rear end housing bushings, tubular frame braces and Grade 8 hardware.
- Includes tall ball-joint upper A-arms and tubular lower A-arms
- Front and rear sway bars, monotube shocks and 1" lowering springs
- Rear tubular upper and lower control arms, replacement rear end housing bushings and tubular frame braces
UMI’s Stage 2 Handling Kit Includes:
- #4031- Tubular lower front a-arms with polyurethane bushings.
- #4033-1 Upper front a-arms with Delrin bushings, tall ball joints.
- #4035- Heavy duty 1-1/4” front sway bar with new bushings & endlinks.
- #4034- Solid 1” heat treated rear sway bar.
- #4050 - 1” lowering springs, linear spring rates (530 lb/in front, 130 lb/in rear).
- #4015 - Tubular rear lower control arms with polyurethane bushings.
- #4016 - Tubular rear upper control arms with polyurethane bushings.
- #4028 - Tubular frame braces with hardware.
- #3000 - Replacement rear end housing bushings.
- #4004 - Front upper & lower Grade 8 hardware kit.
- #4001 - Rear control arm Grade 8 hardware kit.
- #S41030- UMI monotube shocks, designed & tuned for optimum ride quality combined and performance.
Small Block and LS: Small block motors, Pontiac 400 or Big Block with aluminum heads and intake tend to sit level with this kit. Lightweight LS may require spring trimming.
Big Block Engines: An additional 1/4" front end drop may occur on vehicles with full weight big block engines.